Pentax Q10 - Using the Control Panel

1
31
Before Using Your Camera
1
While shooting, the current settings can be checked on the monitor, and
you can switch to the control panel and change settings.
Below, how to set [JPEG Quality] is explained as an example.
1 Press the M button in
Capture mode.
The control panel appears.
2 Use the four-way controller
(2345) to select an item you
want to change the setting for.
You cannot select items that cannot be
changed as a result of current camera
settings.
3 Press the 4 button.
The setup screen of the selected item
appears.
4 Use the four-way controller (45)
or e-dial to select a setting value.
Using the Control Panel
Custom Image
Custom Image
Bright
Bright
[
37
]
JPEG Quality
JPEG Quality
[
37
]
Cancel
Cancel
JPEG Quality
JPEG Quality
37
37
OK
OK
OK
MENU