140
Shooting Settings
5
Set the value to be changed with the e-dial when the capture mode is set
to e (Program Automatic Exposure) mode.
1
Select [Green Button] in Step 2 on p.138.
2
Use the four-way controller (23) to select [E-dial in
Program], and press the four-way controller (5).
3
Use the four-way controller (23)
to select the value to be changed
with the e-dial, and press the 4
button.
4
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
Setting the E-dial Operation in e Mode
P SHIFT
Automatically adjusts the shutter speed and aperture value to
obtain a proper exposure (Program shift). (default setting)
b
Switches to Shutter Priority Automatic Exposure mode. Turn the
e-dial to adjust the shutter speed.
c
Switches to Aperture Priority Automatic Exposure mode. Turn
the e-dial to adjust the aperture value.
OFF Disables the e-dial operation when turned in e mode.
If the d/i button is pressed after turning the e-dial in e mode, the settings
return to normal e mode.
To Next Page
Loading...
Need help?
General
