93
Shooting Functions
4
Using the Shake Reduction Function
to Prevent Camera Shake
The Shake Reduction function reduces camera shake that occurs when
the shutter release button is pressed.
The Shake Reduction function works effectively when taking pictures in
the following situations.
- When taking pictures in dimly lit locations, such as indoors, at night,
on cloudy days and in the shade
- When taking telephoto pictures
1
Press the M button in Capture mode.
The control panel appears.
2
Use the four-way controller (2345) to select [Shake
Reduction], and press the 4 button.
The [Shake Reduction] screen appears.
3
Use the four-way controller (45)
to select Q or R, and press the
4 button.
The camera returns to the control panel.
Taking Pictures Using the Shake Reduction Function
•
The Shake Reduction function does not compensate for blurring caused by subject
movement. To take pictures of a moving subject, increase the shutter speed.
• The Shake Reduction function may not fully reduce camera shake when
taking close-up shots. In this case, it is recommended to turn off the Shake
Reduction function and use the camera with a tripod.
•
The Shake Reduction function will not fully work when shooting with a very slow shutter
speed, for example when panning or shooting night scenes. In this case, it is
recommended to turn off the Shake Reduction function and use the camera with a tripod.
Q Uses Shake Reduction. (default setting)
R
Does not use Shake Reduction.
To Next Page
Loading...
Need help?
General
