174
Editing Images
7
Developing RAW Images
You can convert captured RAW images into JPEG images, and save them
as a new file.
1
Press the four-way controller (3) in Playback mode.
The playback mode palette appears.
2
Use the four-way controller (2345) to select h (RAW
Development), and press the 4 button.
The screen to select a development method is displayed.
3
Use the four-way controller (23)
to select [Developing a Single
Image], and press the 4 button.
The parameters recorded in the image file
appear.
Proceed to Step 6 if you do not need to
change the parameters.
If there are no images that can be processed, [No image can be
processed] appears.
4
Use the four-way controller (23)
to choose a parameter you want
to change.
You can select a different image by
turning the e-dial.
Only RAW images captured with this camera can be developed. RAW images
captured with other cameras cannot be developed on this camera.
Developing One RAW Image