122
Shooting Settings
5
You can adjust the white balance depending on the light source when
taking pictures.
1
Select K in Step 2 on p.121.
2
Under the light you wish to measure the white balance of,
fully display a white sheet of paper on the monitor, or
select a white area as the subject.
3
Press the shutter release button fully.
Set [Focus Method] to \ when the shutter cannot be released.
Adjust the white balance as necessary.
The message [The operation could not be completed correctly] appears
when measuring is unsuccessful. Press the 4 button while displayed
to remeasure the white balance.
4
Press the 4 button.
The camera is ready to take a picture.
Adjusting the White Balance Manually
• No image is recorded when the shutter release button is pressed to adjust
the white balance.
• If a picture is extremely overexposed or underexposed, the white balance
may not be adjusted. In this case, adjust exposure to the correct exposure
before adjusting the white balance.
To Next Page
Loading...
Need help?
General
