202
Connecting to a Computer
9
Connect the camera to a computer using the provided USB cable I-USB7.
1
Turn the computer on.
2
Turn off the camera, and use the USB cable to connect the
PC/AV terminal of the camera and the computer.
3
Turn the camera on.
The camera is recognized as a removable disk or an SD Memory Card
with a volume label “Q10”.
If the “Q10” dialog appears when the camera is turned on, select [Open
folder to view files using Windows Explorer] and click the OK button.
4
Save the captured images to the computer.
Copy the image file(s) or folder(s) to the hard disk of the computer.
5
Disconnect the camera from the computer.
Connecting the Camera and a Computer
The camera cannot be operated while it is connected to the computer. To
operate the camera, terminate the USB connection on the computer, then turn
off the camera and remove the USB cable.
To Next Page
Loading...
