139
Shooting Settings
5
When [One Push File Format] is assigned to the d/i button, specify the
function settings.
1
Select [One Push File Format] in Step 2 on p.138.
2
Use the four-way controller (23) to select [Cancel after 1
shot], and use the four-way controller (45) to select O or
P.
3
Use the four-way controller (23) to choose a file format.
The left side is the [File Format] (p.117) setting and the right side is the
file format when the d/i button is pressed.
4
Press the four-way controller
(5), use the four-way controller
(23) to select a file format that is
used when the d/i button is
pressed, and press the 4
button.
5
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
Setting the One Push File Format
O
The recording format returns to the original file format after a
picture is taken. (default setting)
P
The setting is canceled when any of the following operations are
performed.
- the d/i button is pressed again
- the Q button, 3 button, M button or power switch is
pressed
- the mode dial is turned
To Next Page
Loading...
Need help?
General
