129
Shooting Settings
5
The outcome of cross processing varies each time a picture is taken. If you
take a cross processed image that you like, you can save the Cross
Processing settings used in that image. A total of three Cross Processing
settings can be saved.
1
Press the four-way controller (3) in Playback mode.
The playback mode palette appears.
2
Use the four-way controller (2345) to select s (Save
Cross Processing), and press the 4 button.
The camera will search for cross processed images starting from the most
recent image taken. (An hourglass icon is displayed while searching.) When
a cross processed image is found, the screen to save the settings appears.
If there are no cross processed images, the message [No cross
processed image] appears.
3
Use the e-dial to select a cross
processed image.
4
Use the four-way controller (23) to select a number, and
press the 4 button.
The settings of the selected image are saved to [Favorite 1 - 3] and the
last displayed image is displayed again.
Saving the Cross Processing Settings of a Captured Image
To Next Page
Loading...
