Pentax Q10 User Manual

228
Appendix
11
Autofocus does
not work
The subject is too
close
Move away from the subject and take a
picture.
The focus method
is set to \
Set [Focus Method] to =. (p.84)
The focus
cannot be
locked
[Autofocus Method]
is set to [Face
Detection] or
[Tracking]
Autofocus is not locked (focus lock) when
[Autofocus Method] is set to [Face
Detection] or [Tracking]. The camera will
continue focusing on the subject while the
shutter release button is pressed halfway.
If there is a subject that you want to focus
on, set [Autofocus Method] to [AF Select
(25 Points)], [Select], or [Spot], and use
the focus lock. (p.89)
The capture mode
is set to \,
l, Z,
R or n of H
mode.
Set the capture mode to any mode other
than \ (Moving Object),
l (Night Snap),
Z (Pet)
, R (Kids) or n (Stage Lighting)
of H (Scene) mode. (p.70)
The AE Lock
function does
not operate
The shutter speed
is set to h
Set the shutter speed to any mode other
than h. (p.76)
The built-in
flash does not
discharge
When the flash
mode is set to C or
C
, the flash will
not discharge if the
subject is bright
Set the flash mode to b (Flash On) or D
(Flash On+Red-eye Reduction). (p.55)
The capture mode
is set to K, d,
A, Z, p, y,
U, n or E of H
mode
Set H (Scene) mode to any mode other
than K (Sunset), d (Blue Sky), A
(Night Scene), Z (Night Scene HDR),
p (HDR), y (Backlight Silhouette),
U (Candlelight), n (Stage Lighting) or
E (Museum). (p.70)
The USB
connection with
a computer
does not work
properly
The USB
connection mode is
set to [PTP]
Set [USB Connection] in the [R Set-up 2]
menu to [MSC]. (p.201)
Problem Cause Remedy

Pentax Q10 Specifications

General

Brand	Pentax
Model	Q10
Category	Digital Camera
Language	English