79
Shooting Functions
4
3
Press the four-way controller
(3), and use the four-way
controller (45) to select l or
c.
4
Press the four-way controller (3), and turn the e-dial to set
the bracket value.
The bracket value can be set in increments of 1/3 EV or 1/2 EV
depending on the lens being used.
Available operations
5
Press the 4 button.
The camera is ready to take a picture.
l Exposure
Bracketing
Takes pictures with the shutter release button.
c
Exposure Bracket
+Remote Ctrl
Takes pictures with an optional remote control unit. The
remote control operates according to the Remote Control
shooting (p.96) setting. The shutter is immediately
released when set to
i
(Remote Continuous Shooting).
Step Interval Bracket Value
1/3 EV
±0.3, ±0.7, ±1.0, ±1.3, ±1.7, ±2.0, ±2.3, ±2.7, ±3.0
1/2 EV
±0.5, ±1.0, ±1.5, ±2.0, ±2.5, ±3.0
mc button
´ e-dial
Adjusts the exposure compensation value (when taking only
underexposed or overexposed images).
d/i button Resets the compensation value.
• When [Autofocus Method] (p.85) is set to [AF Select (25 Points)], [Select] or
[Spot], the focus position is locked in the first image and is used for
subsequent images.
• Switch to a mode other than l or c in the Drive Mode setting screen to
cancel Exposure Bracketing. The setting is canceled when the camera is
turned off if [Drive Mode] is set to P (Off) in [Memory] of the [A Rec. Mode
3] menu. (p.189)
• You can combine Exposure Bracketing with the built-in flash or an external
flash (P-TTL auto only) to change only the flash output continuously.
To Next Page
Loading...
