87
Shooting Functions
4
You can set the position and range of the autofocusing area (AF area).
1
Select [AF Select (25 Points)] or [Select] in Step 3 on p.86,
and press the 4 button.
The camera returns to the control panel.
2
Press the 3 button or the shutter release button
halfway.
The camera is ready to take a picture.
3
Press the 4 button.
A black rectangle appears on the monitor, and the AF area can be set by
changing the position and size of this rectangle.
4
Select the AF area.
Available operations
5
Press the 3 button.
The AF area is set.
Selecting the Desired Focusing Area
Four-way controller
(2345)
Changes the position of the AF area.
E-dial to the right (y) Increases the size of the AF area (when [AF Select
(25 Points)] is selected).
E-dial to the left (f) Reduces the size of the AF area (when [AF Select
(25 Points)] is selected).
4 button Returns the AF area to the center.
The set AF area remains in the memory even if the autofocus method is
changed or the camera is turned off.
MENU
To Next Page
Loading...
Need help?
General
