Input
11 - 6
A
B
To achieve the illustrated input menu, the following functions must be activated:
F1 (Placement stitch) – and/or
Speed (speed limitation) – and/or
Stitch count.
● Select the desired speed value for the current seam section by pressing the
corresponding +/- key.
● Select the desired speed value for the number of stitches in the current seam section by
pressing the corresponding +/- key.
● Set the stitch placement position by turning the balance wheel or by pressing the
corresponding +/- key.
● Select the next input menu by pressing the Scroll key.
This input menu can only be selected if the start backtack function is
activated.
● By pressing the corresponding +/- key select the desired value for the number of forward
stitches (A) of the start backtack for the current seam section.
● By pressing the corresponding +/- key select the desired value for the number of reverse
stitches (B) of the start backtack for the current seam section.
● By pressing the corresponding +/- key select the desired value for the start backtack
speed of the current seam section. In parameter 101 it is possible to stipulate whether
the start backtack is sewn with a fixed speed or dependent on the pedal.
● Select the next input menu by pressing the Scroll key.
2F1
2 3500 125 31
PM
F1
2 A B
2 3 3 800
PM
To Next Page
Loading...
Need help?
General
