Input
11 - 7
● By pressing the corresponding +/- key a new seam section is inserted.
● By pressing the corresponding +/- key the current seam section is deleted.
● By pressing the corresponding +/- key it is possible to stipulate whether the selected
seam section is the last one in the program ("YES") or whether another seam section
should be added ("NO").
● By pressing the Scroll key, the first input menu is selected again
or
change to programmed sewing by pressing the TE/Speed key. In this case the values
entered are stored.
INS
DEL
END
This input menu can only be selected if the end backtack function is
activated.
● By pressing the corresponding +/- key select the desired value for the number of reverse
stitches (C) of the end backtack for the current seam section.
● By pressing the corresponding +/- key select the desired value for the number of forward
stitches (D) of the end backtack for the current seam section.
● By pressing the corresponding +/- key select the desired value for the end backtack
speed of the current seam section.
● Select the next input menu by pressing the Scroll key.
2 C D
2 3 3 900
PM
C
D
2 END
2 INS DEL NO
PM
To Next Page
Loading...
Need help?
General
