EasyManua.ls Logo

Philips iE33 - Electrical Power Requirements; Image Management Network Requirements

Philips iE33
364 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
supported printers, see the manufacturer's website and search for "universal
print driver."
Color image printers
Sony UP-21MD
Sony UP-D23MD
Black-and-white image printer
Sony UP-D895MD
Black-and-white report printers
HP LaserJet 1300
Color report printers
HP Color LaserJet 2550L
Color Deskjet 5650
NOTES
Use only the printers listed here with your ultrasound system.
On some systems, the report printer must be connected to one of the two
USB ports that are located in the printer bay.
To print the entire screen image on a video printer, select the Full Screen
(1680 x 1050) Local Printing Area option under Peripherals in the
setups. To slightly enlarge the ultrasound image on the video printer, select
Video Out (1024 x 768).
Connecting an External Printer
WARNINGS
When using additional peripheral equipment powered from an electrical
source other than the ultrasound system, the combination is considered
to be a medical system. It is your responsibility to comply with
IEC 60601-1-1 and test the system to those requirements. If you have
questions, contact your Philips representative.
Do not use nonmedical peripherals, such as report printers, within 1.5 m
(5 ft) of a patient, unless the nonmedical peripherals receive power from
107
iE33 User Manual
4535 616 23901
4
Preparing the System

Table of Contents

Other manuals for Philips iE33

Related product manuals