Review
During or after an exam, you can use Review to examine and compare images
acquired in the exam. You can also review multiple exams for one patient.
In Review, you can look at the images or cineloop sequences that you stored.
You can view, send, print, and back up your stored images. You can also perform
analysis on images in Review. Images that are in image memory can be stored
on the ultrasound system hard drive, on removable media, or on
DICOM-compatible devices on a network. You can display images within an
exam in several layouts, and you can display images from different exams.
Starting Review
1. Press Review to enter Review mode.
The display that appears depends on whether an exam is active on the system.
NOTES
• If an exam is in progress, pressing Review opens the Review Exam
display.
• If no exam is in progress, pressing Review opens the Patient Directory
display.
2. To return to live imaging, press Review again.
Navigating Thumbnails and Images
In Review, you can view small images, called thumbnails. Thumbnails are located
on the right side of the Review Exam display. From these thumbnails, you can
also display one or more images in their original format. If an image represents
a 3D data set, it opens in 3D review mode.
NOTE
When reviewing images of an exam loaded from the Patient Directory, thumbnails
will not be available in some circumstances. For example, exams copied from
199
iE33 User Manual
4535 616 23901
7
Performing an Exam
To Next Page
Loading...