sign value, whether visible or not, affects any calculations performed with the
reported value. The system includes the sign value in calculations.
To specify the display of the Doppler velocity minus sign:
a. Press the Setup key.
b. Select Analysis Config.
c. Select the tab of the calculations package that you want to change, and then
select Tools & Results.
d. Under Hide Doppler Velocity Minus Sign, select On or Off.
e. Click Done.
Options
In addition to the standard features available in the system, other features are
available as purchasable licensed options. The types of options available include
clinical options, protocols, imaging capabilities, QLAB Advanced Quantification
Software plug-ins, and connectivity capabilities.
Installing Temporary Options
The system lets you temporarily install up to five licensed options. You can then
evaluate these options for a fixed length of time, which is set by Philips. Before
you can install temporary options, you must request and receive an activation
key for each option you want to install. The installation process requires restarting
the system, so be sure that the last exam has been closed before installing options.
1. Contact your Philips representative to obtain an activation key for each
licensed option you want to evaluate.
2. Once you have received the activation keys, press End Exam to ensure that
the last exam has been closed.
3. Press the Setup key.
4. Click Service.
5. Click Options.
6. Click Temporary Options.
185
iE33 User Manual
4535 616 23901
6
Customizing the System
To Next Page
Loading...