Philips iE33 - Loading Quick Save Presets from Removable Media; System Setups

5. From the Select the Media menu, select the removable media that you are
using.
6. Click Backup.
NOTES
• The backup list shows the data that is backed up.
• If a dialog box indicates that the media is too full to complete the copy
process, replace the media with a new one and click Backup again.
7. After the backup is complete, click Close.
8. Click Done.
Loading Quick Save Presets from Removable Media
1. Load the DVD containing the data into the DVD drive, or connect the USB
device containing the data to a USB port on the system.
2. Press the Setup key.
3. In the setups, click Service, and then click System Management.
4. Click Backup/Restore.
5. From the Select the Media menu, select the media type that you are using.
6. Deselect the data that you do not want to import.
7. After the import is complete, click OK.
8. Click Close to close the Service display. A displayed message might prompt
you to restart the system.
System Setups
Setups are system parameters that you can change. By changing setups, you can
customize the system to meet your operating preferences. Setups are organized
into seven standard categories: System Settings, Analysis Config
(configuration), Annotate, Print/Network, Audio/Video, Protocols, and
Service. Additionally, two other categories appear only if the corresponding
options are installed on the system. These optional categories are Voice Control
183
iE33 User Manual
4535 616 23901
6
Customizing the System