User Information Conventions
The user information for your product uses the following typographical
conventions to assist you in finding and understanding information:
• All procedures are numbered, and all subprocedures are lettered. You must
complete steps in the sequence they are presented to ensure success.
• Bulleted lists indicate general information about a particular function or
procedure. They do not imply a sequential procedure.
• Control names and menu items or titles are spelled as they are on the
system, and they appear in bold text. The only exceptions are the trackball
and the buttons adjacent to it, which are unlabeled.
• Symbols appear as they appear on the system.
• The pointer is the cursor used to select elements on the display. Use the
Pointer control to display the pointer.
• Point means to position the tip of the pointer or cursor on an item on the
display.
• Click or select means to move the pointer or cursor to an object and press
one of the unlabeled Select controls located on either side of the trackball.
• Double-click means to quickly click twice to select an object or text.
• Drag means to place the pointer over an object and then press and hold
one of the Select buttons while moving the trackball. Use this method to
move an object on the display.
• Touch means to press a button on the touch screens, located above the
control panel.
• Selecting means to specify an image or thumbnail to be exported or deleted.
To select an image, either click on the thumbnail or the thumbnail number.
• Highlighting means to mark an image you want to reject during a protocol
exam or an image you want to post-process. To highlight an image, click
inside the image (but not on the number).
iE33 User Manual
20
4535 616 23901
Read This First
1
To Next Page
Loading...