Touch Screen Knob Displays
Knob displays appear on the bottom two rows of the touch screens. Each knob
display corresponds to a knob below it on the control panel. Like touch screen
buttons, knob displays assume different functions based on the current imaging
mode.
In many cases, two knob displays share one knob. Only one of the two knob
display can be active at any time. Touch one of the knob display to make it active.
The active knob display is gold, and the inactive one is blue. If only one knob
display appears above a knob, you do not need to touch the knob display before
using the knob.
Turn the knob below a knob display to change the value for that function. For
most functions, the value appears on the knob display. In a few instances,
however, the value appears on the monitor display instead of on the knob display.
One example of this is the Baseline knob display.
Knob Displays
iE33 User Manual
144
4535 616 23901
Using the System
5
To Next Page
Loading...