Philips iE33 - Creating Quick Save Presets; Deleting Quick Save Presets

Once you create a Quick Save preset, it appears on the Preset/Transducer
touch screen when the associated transducer is selected. When you select the
Quick Save preset, the system automatically invokes the settings in the preset.
You can delete existing Quick Save presets, copy them onto a DVD or USB
storage device, and load them into another iE33 system.
The number of Quick Save presets you can store for a transducer/application
combination is limited only by the number of buttons available on the
corresponding Preset/Transducer touch screen. The number of buttons
available, in turn, is dependent on which application is selected and how many
Tissue Specific presets that application includes.
Creating Quick Save Presets
You can create a new Quick Save preset that is based on an existing preset. You
can do this even during an exam, while using the preset.
1. Touch Preset/Transducer.
2. On the touch screen, select the transducer and the preset on which you want
to base your Quick Save preset.
3. Adjust the system controls to create the settings for your preset. (You can
select an imaging mode, an image orientation, the number of focal zones, and
so on.)
4. Press the Quick Save key.
• For the Quick Save label, type the name of the new preset. If you do not
enter a name before saving a preset, the system assigns a name.
• For Calculation Package, select a calculation package.
• For Annotation/Body Marks, select the annotation and body mark you
want as the defaults.
5. Click OK.
Deleting Quick Save Presets
You can delete any Quick Save preset on the system except the active preset.
181
iE33 User Manual
4535 616 23901
6
Customizing the System