• To enhance the visibility of soft tissue, use the Soft Echo Enhance touch
screen control.
• To enhance the image without altering the image resolution, use XRES
image processing.
• To enhance contrast resolution and reduce speckle when using an xMatrix
transducer, use the Elevation Comp touch screen control.
• To compare an acquired (or review) image with a live image, use the
Compare control.
3. Use additional controls on the right touch screen, as needed.
4. To enter another imaging mode, touch the control for that imaging mode.
5. To return to 2D-only imaging from any other imaging mode, touch 2D.
Annotation
You can place text labels and arrows on an image to identify anatomical structures
and locations. You can also annotate an image with a body marker graphic that
indicates the part of the anatomy that you are scanning.
Adding Labels Using Annot
NOTE
If you press Select, unfreeze the image, or change the imaging mode or settings
that affect the trackball assignment, the Annotation application goes into standby
mode. This is indicated on the Annot button by the indicator being turned off
and a light ring around the button being turned on. To return to the Annotation
application, touch Annot or any control on the Annot touch screen.
1. Touch Annot.
2. Use the trackball to position the text cursor on the display, or touch Home
to return it to the home location.
NOTE
You cannot move a label once you have added it to the display.
iE33 User Manual
192
4535 616 23901
Performing an Exam
7
To Next Page
Loading...