addition, the measurements and calculations can be associated with system and
custom tables and equations.
The measurements and their derived calculations included with the calculations
packages are based on medical references. See the "References" section in the
Help.
NOTE
Ensure that you follow current medical practices when identifying specific
measurement points on an image.
Measuring 2D Distance
2D distance and trace or elliptical area and circumference measurements can
be performed on MPR and volume images.
1. Obtain the image that you want to measure and press Freeze.
2. Press Caliper.
3. Use the trackball to position the first caliper in the 2D image.
4. Press Select to anchor the first caliper and display the second caliper.
5. Use the trackball to position the second caliper. The Results box displays the
results.
6. Touch End Measure, or press Select or Enter to complete the
measurement.
Obtaining a Typical Labeled Measurement
This general procedure describes how to measure by using a typical labeled
measurement tool. Guided or complex tools require specialized procedures,
found in the Help.
1. Obtain the image you want to measure and press Freeze.
2. Touch Analysis.
3. Touch a collection label to display group and measurement labels.
iE33 User Manual
202
4535 616 23901
Performing an Exam
7
To Next Page
Loading...