1. If a preset you want to delete is active, deactivate it by touching
Preset/Transducer, and then selecting the associated transducer and a
different preset.
2. Press the Setup key.
3. In the setups, click Service, and then click Test & Utilities.
4. Click Disk Maintenance.
5. To delete specific presets, do the following:
a. Select the presets you want to delete and click Delete Presets.
b. Click Yes on the Delete Presets dialog box.
c. Click Close.
d. Click Done.
6. To delete all presets, do the following:
a. Click All Presets, and click Delete Presets.
b. Click Yes on the Delete Presets dialog box.
c. Click Close.
d. Click Done.
Copying Quick Save Presets to Removable Media
You can copy Quick Save presets to a DVD or a USB storage device. This
function is useful for archiving presets and for sharing presets among other iE33
systems. When you copy Quick Save presets, all available data is copied.
NOTE
If you receive an error message when exporting data to a DVD or when viewing
exam data on a DVD, you may need to eject the DVD from the drive and
re-insert it.
1. Load a DVD into the DVD drive, or connect a USB device to a USB port on
the system.
2. Press the Setup key.
3. In the setups, click Service, and then click System Management.
4. Click Backup/Restore.
iE33 User Manual
182
4535 616 23901
Customizing the System
6
To Next Page
Loading...