Print can print only to local printers. Alt Print is not available while a loop is
being acquired. Report printing is assigned to a single dedicated report printer.
NOTE
If you print a monochrome image while a Chroma map is selected, the system
sends the image to the color printer. Also, if you export a monochrome image
while a Chroma map is selected, the system sends the image as a color image.
This is normal. To ensure that black-and-white images are sent to the
black-and-white printer, set Chroma to Off.
Printing in Live Imaging
You can print live or frozen images during an exam. To print using the Print or
Acquire controls, a printer must be assigned to these controls in setups. The
Print control prints only to the local printers assigned to it. The Acquire
control captures and stores a single-frame image, and sends it to the DICOM
printers assigned to this control.
1. Display the live or frozen image you want to print.
2. Do one of the following:
• Press Acquire on the system control panel.
• Press Print on the system control panel.
• Touch Alt Print on the touch screen.
• Press PRINT on a printer that is connected to the system.
NOTE
If your print setting includes multiple images per page, the printer will not
print an image until the total number is reached. For example, if you have a
2x2 format selected, the printer will not print the page until you have captured
four images or, if the number captured is less than four, until the end of the
exam.
iE33 User Manual
198
4535 616 23901
Performing an Exam
7
To Next Page
Loading...