Philips iE33 - Symbols

Symbols
The International Electrotechnical Commission (IEC) has established a set of
symbols for medical electronic equipment that classify a connection or warn of
potential hazards. Of those symbols, the following may be used on your Philips
product and its accessories and packaging.
Isolated patient connection (Type BF applied part).
Defibrillation-proof patient connection (Type BF
applied part).
Non-isolated patient connection (Type B applied
part).
Isolated patient connection for applied part intended
for intraoperative use, including direct cardiac
application and contact with major vessels (Type CF
applied part).
Defibrillation-proof patient connection (Type CF
applied part).
Identifies ESD (electrostatic-discharge) sensitivity of
a connector that is not tested as specified in
IEC 60601-1-2. Do not touch exposed connector
pins. Touching exposed pins can cause electrostatic
discharge, which can damage the product.
Identifies an On/Off control.
35
iE33 User Manual
4535 616 23901
2
Safety