NOTE
To provide improved storage capabilities, the current system software writes
data to CDs and DVDs in a different format. As a result, CDs and DVDs that
were used on an iE33 system with any previous version of system software can
be read on your system but cannot be used to store data.
Loading and Ejecting a Disc
Do one of the following:
• To open the drive tray, press the Eject button on the drive.
• To load a disc, place the disc into the tray and then press the Eject button
on the drive, or gently push the tray in until it closes.
• To eject a disc, press the Eject button on the drive.
Erasing a DVD
Erasing a rewritable disc (DVD+PW, DVD-PW, or CD-PW) erases all of the
data on it and prepares it for reuse. After a disc is erased, the entire capacity of
the disc is once again available. You can also erase a write-once disc (DVD+R,
DVD-R, or CD-R) , but you will not be able to write files to the erased portion
of the disc.
NOTE
If the system cannot erase the disc, use a computer to erase it. If the computer
cannot erase the disc, it may be damaged.
1. Press Review.
2. Load a disc into the drive and wait for it to become available.
3. In the Review Exam display, click Erase.
4. In the Erase Disc dialog box, click OK to erase the disc.
5. When the dialog box indicates that erasing is complete, click OK.
175
iE33 User Manual
4535 616 23901
5
Using the System
To Next Page
Loading...