Adding an Image Title
You can add a title to the image display.
1. Press the Title Cursor key.
2. Type the text that you want to add for the title.
3. To erase text, press the Backspace key.
4. When finished, press Select or press the Title Cursor key again.
Displaying Body Markers
NOTES
• During review, the Body Marks control and touch screen are available
only when an image is displayed in Full Res layout.
• If you press Select, unfreeze the image, or change the imaging mode or
settings that affect the trackball assignment, the Body Marker application
goes into standby mode. This is indicated on the Body Marks button by
the indicator being turned off and a light ring around the button being turned
on. to return to the Body Marker application. To return to the Body Markers
application, touch Body Marks or any control on the Body Marks touch
screen.
1. Touch Body Marks to display the Body Marks touch screen for the current
transducer and preset.
2. Touch a button to put the corresponding body marker on the display in the
home location or to replace an existing body marker.
3. Use the trackball to position the transducer scan plane indicator on the body
marker. Turn Rotate Probe to change the orientation of the transducer
scan plane indicator.
4. Do any of the following:
• To move the marker, touch Move Body Mark, position the body marker
using the trackball, and touch Move Body Mark again.
• To remove a body marker, touch Erase Body Mark.
iE33 User Manual
194
4535 616 23901
Performing an Exam
7
To Next Page
Loading...