Touch Screen Layout
The controls on the right and left touch screens are organized by function.
Right Touch Screen Controls
The right touch screen is divided into three areas, each containing a specific type
of imaging controls (see figure):
• Imaging mode controls: Use these controls to switch between imaging
modes, such as 2D and PW Doppler. These controls are in the top two
rows of the right touch screen. When selected, each imaging mode control
displays a set of related controls in the bottom four rows of the left touch
screen.
• Imaging feature controls: Use these controls to optimize the image with
features such as SonoCT imaging and XRES processing. These controls are
in the middle two rows of the right touch screen.
• Imaging feature knob displays: Use these controls to set imaging
functions such as magnification or focus. These controls are in the bottom
two rows of the right touch screen. For more information on knob displays,
see "Touch Screen Knob Displays" on page 144.
iE33 User Manual
136
4535 616 23901
Using the System
5
To Next Page
Loading...