Positioning the System in Conned Spaces
Follow this procedure when positioning the system in a confined space.
1. Release the steering locks and wheel brakes by using the appropriate step:
• On a one-pedal system, press the pedal to its middle position.
• On a two-pedal system, Press the right foot pedal halfway down.
2. Move the system in any direction using the front handle.
3. When the system is in position, set the wheel brakes by using the appropriate
step:
• On a one-pedal system, press the foot pedal down fully.
• On a two-pedal system, press the left foot pedal down fully.
One-Pedal System
iE33 User Manual
118
4535 616 23901
Preparing the System
4