Two-Pedal System
Setting Up After Moving
CAUTION
If the system behaves abnormally after moving, contact your Philips representative
immediately. The components are installed securely and can withstand
considerable shock; however, excessive shock can cause a system failure.
1. With the system in position and the brakes set, connect the power, network,
modem and other cables from the system to the appropriate wall receptacles.
2. Unlock the monitor by moving the release lever to the unlocked position,
and then position the monitor.
119
iE33 User Manual
4535 616 23901
4
Preparing the System
To Next Page
Loading...