Philips iE33 - Training Voice Profiles

2. Press the Setup key.
3. Click Voice Control. On the Voice Profiles tab, click New Voice Profile.
4. Type a unique user name for your profile. Click Next.
5. Select the language you will be using for giving voice commands. Click Next.
6. Select the headset you are using from the list. Click Next.
NOTE
If the headset has not been paired to your system, follow the prompts.
7. Acknowledge the communication between the system and the headset by
pressing the Call Handling button on the headset.
8. Click Start and read the paragraph in the dialog box. When you are done,
click Stop. You have completed the creation of a new voice profile. For
information regarding training the voice profile, see "Training Voice Profiles"
on page 156.
9. Click Done.
Training Voice Proles
You can use voice control regardless of whether you have created and trained
a voice profile. However, Philips recommends that you create and train a voice
profile before using voice control. Training voice control to recognize your
speech significantly improves recognition accuracy. Minimally training a voice
profile requires only about 2 minutes.
NOTE
After you have trained a voice profile to the minimum level, you can do further
training at any time. Although additional training does improve recognition
accuracy, the longer you train, the smaller the degree of improvement becomes.
1. If the headset has been labeled, note the name or number on the label. Turn
on the headset and put it on.
2. Press the Setup key.
3. Click Voice Control.
iE33 User Manual
156
4535 616 23901
Using the System
5