Do thisFor this type of button
Touch to activate one button in a
group of related buttons. The light ring
around the button indicates an active
state. Only one of the buttons in the
group can be active at one time. In this
example, D1 (dual image 1) is inactive,
and the other button in the group, D2,
is active. (For another type of control,
the light ring indicates a standby state.
See the next control type, below.)
Touch to switch between one of three
states: inactive, standby, and active.
Standby mode is indicated by a light ring
around the control. In this example,
touching the inactive control (top)
displays a zoom box on the image,
touching the standby control (middle)
magnifies the image, and touching the
active control (bottom) turns the zoom
function off.
Touch to assign the function of this
knob display to the knob below it. For
information on knob displays, see
"Touch Screen Knob Displays" on page
144
Touch to change the value displayed on
the button. Repeatedly touching this
type of button cycles through the range
of available values. Do not confuse
these buttons with knob displays, which
also display a value but are not intended
to function as a button.
143
iE33 User Manual
4535 616 23901
5
Using the System
To Next Page
Loading...