2. To rotate the array to 90 degrees, align the white bar on the side of the array
control with the center of the proximal end of the transducer handle.
3. To rotate the array to a specific setting, align a setting on the top of the array
control with the center of the proximal end of the transducer handle.
Rotating the S7-3t Imaging Array
Array control1
Align settings on the control with the proximal end of the
transducer handle (90° setting as shown).
2
iE33 User Manual
272
4535 616 23901
Transesophageal Transducers
10
To Next Page
Loading...