Pitco SSHLV Series - Page 39

Pitco SSHLV (ROV) Gas Fryers
6. Remove five (5) screws from burner plate
using 5/16 nut driver.
7. Position burner assembly out of the way, so
you have access to DLP fitting.
8. Use ½ inch wrench to remove the probe.
9. Remove front panel divider and front panel
using a phillip screw driver.
10. Unplug probe and replace with new probe.
11. Follow steps 1 through 11 in reverse to
reinstall new probe.
L22-392 Rev 1 39