Pitco SSHLV Series - Replacing the Basket Lift Components; Removing the Basket Lift Cover; Replacing the Basket Lift Transformer

Pitco SSHLV (ROV) Gas Fryers
32 Replacing the Basket Lift Components
32.1 Removing the Basket Lift Cover
1. Remove the six (6) screws, which hold the
back of the basket lift cover, using a 5/16 inch
socket.
2. Lift up the back and remove.
32.2 Replacing the Basket Lift Transformer
1. Remove the two (2) screws, which hold the
transformer, using a 5/16 inch socket.
2. Remove all wires on transformer box using
needle-nose pliers. See “Wiring Diagram –
Basket Lifts” in Section 36.10.
1. Follow steps 1 through 2 in reverse to
reinstall new transformer box.
L22-392 Rev 1 68