Pitco SSHLV Series - Replacing the Waste Oil and Components; Removing Rear Mounting Bracket

Pitco SSHLV (ROV) Gas Fryers
21 Replacing the Waste Oil and Components
21.1 Removing Rear Mounting Bracket
1. Remove six (6) screws using a 5/16 socket
wrench.
!
DANGER
!
Prior to moving, testing, maintaining or repairing
your appliance, ensure it is emptied of all oil,
cool, disconnected from gas and all electrical
power. Failure to do so may result in property
damage, damage to your fryer, injury or death.
2. Disconnect from the filter return line using a
1-1/16 inch wrench.
3. Remove two (2) screws with a 5/16 socket
wrench.
L22-392 Rev 1 45