Pitco SSHLV (ROV) Gas Fryers
17 Replacing the Auto Top Off Probe (If equipped)
DANGER
Prior to moving, testing, maintaining or repairing
any appliance, ensure it is emptied of all oil,
cool, disconnected from gas and all electrical
power. Failure to do so may result in property
damage, damage to your fryer, injury or death.
1. Using a 5/16” nut driver. Remove two (2)
screws from SCB runner tube.
2. Remove orifice from tube.
3. Remove two (2) screws from pilot assembly.
4. Use two (2) wrenches 1-1/16inch & 15/16
inch to remove top connection of gas valve.
5. Drop down and out of way.
L22-392 R1 38
To Next Page
Loading...
