Pitco SSHLV Series - Checking the Gas Pressure; Taking a Supply Gas Pressure Reading

Pitco SSHLV (ROV) Gas Fryers
26 Checking the Gas Pressure
26.1 Taking a Supply Gas Pressure Reading
1. Turn off gas.
2. Unscrew and remove the gas supply plug
with a 3/16 inch hex wrench.
3.Finger tighten the test fitting into the test port.
4. Finish tightening the test fitting using a 7/16
inch open-ended wrench.
5. Connect the manometer.
L22-392 Rev 1 53