Pitco SSHLV (ROV) Gas Fryers
20. Lift up and pull out the tank.
NOTE: Lifting the tank requires two
(2) technicians.
21. Set tank on floor.
22. Remove the drain line using a pipe wrench.
23. Remove the four (4) screws, which hold the
flue, using a 5/16 inch socket and 3/8 inch
close-ended wrench.
24. Remove the return valve using two
adjustable wrenches.
25. Remove actuator with needle nose pliers.
26. Remove filter piping with 1-1/16 inch
wrench.
27. Follow steps 1 through 26 in reverse to
reinstall a new frypot.
L22-392 Rev 1 67
To Next Page
Loading...
