Printing a test pattern
Printing a test pattern lets you see if the printhead is functioning properly or if you have enough ink in the
cartridge.
1. Tap the Settings (gear) icon in the global toolbar.
2. Tap the Mail Printer Maintenance button within the Mail Settings section.
3. Tap the Print Test Pattern button.
4. A sample pattern displays along with the message: "Print a Test Pattern?"
5. Feed the envelope through the machine.
6. Examine the pattern printed on the envelope.
l If the lines are unbroken and match the "Good" test pattern shown on the display, tap Done.
l If the test pattern has missing or incomplete lines, tap Clean Print Nozzle Once the cleaning
operation completes, you will be prompted to print another test pattern. If the pattern still has
broken or missing lines, you may need to replace the ink cartridge or print head.
Note: Cleaning the print nozzles consumes ink. If you see no improvement in print quality, do not repeat
the cleaning.
8 • Mail Machine Maintenance
To Next Page
Loading...
