Setting up a wired network (LAN) connection
Instructions
For information about the connection settings required on your network, contact your IT department.
1. Tap Settings (gear icon).
2. Tap Wired (Ethernet).
3. Select the Connection Type.
l If you want the meter to get an IP address automatically and do not need a static IP address:
a. Select the Connection Type DHCP.
b. Tap Connect.
l If you need to set the meter to a static IP address:
a. Select the Connection Type Static IP.
b. To enter the IP address, Netmask, and DNS Address:
i. Tap on the line.
ii. Enter the item. Contact your IT department to obtain the correct settings for your
network.
iii. Tap the green circled >.
iv. Once the keyboard has closed, tap Connect.
Machine Information
Pitney Bowes Operator Guide June 2018 149
To Next Page
Loading...
