Flashing power light
Issue
The power light is flashing and the meter is not working.
Cause
The power button was held down too long when turning the meter on or off.
Resolution
You may be able to clear the error by restarting the meter:
1. Unplug the power cord.
2. Wait for the display to turn off.
3. Wait one minute.
4. Turn the power back on.
Tips:
l When turning the meter on, just tap the power button. Do not hold it down.
l When turning the meter off, hold the power button for only 5 seconds.
Errors
Pitney Bowes Operator Guide June 2018 158
To Next Page
Loading...
