Creating or disabling the security pin
Note: If you assigned a security pin when you installed your SendPro® C-Series meter, you will be
prompted to enter it when you power it up or after it has entered the sleep mode.
To create a security pin:
1. Tap the Settings (gear) icon in the global toolbar.
2. Tap the Security PIN option in the Devise & Network section of the screen.
3. Tap the Create PIN button.
4. Enter a 4-digit numeric PIN using the keyboard on the display.
5. You will be prompted to verify the PIN by entering it again.
To change or disable the security PIN:
1. Tap the Settings (gear) icon in the global toolbar.
2. Tap the Security PIN option in the Devise & Network section of the screen.
3. Tap Change PIN or Turn OFF Security PIN, whichever is appropriate.
4. You will be prompted to enter the current security PIN for either option.
To manually lock your SendPro® C-Seriesmeter:
1. Tap the user profile icon (as shown below) in the top right corner of the global toolbar.
Getting Started Home Screen
Pitney Bowes Operator Guide June 2018 22
To Next Page
Loading...
