Installing a scale
If you did not install a scale when you installed your SendPro® C-Series meter you can do it at any time
later.
To access step-by-step installation instructions for compatible scales:
1. Tap the Settings (gear) icon in the global toolbar.
2. Scroll to the bottom of the Setting screen and tap Scale Installation Instructions under
Advanced Options section.
3. To view all of the available scales, swipe to the left on the screen.
4. Tap on the appropriate scale to select it, then tap Continue.
5. Follow the step-by-step instructions displayed on the screen. To advance from one step to the
next, swipe the screen to the left.
Getting Started Home Screen
Pitney Bowes Operator Guide June 2018 30
To Next Page
Loading...
