5. Remove the metal grate and wick from the moistener base.
6. Clean the brush and wick with water and rinse thoroughly.
7. Place the wick back in the metal grate and replace in the moistener base.
8. Replace the moistener brush in the holder (see step 3).
9. Replace the moistener brush assembly on top of the moistener base and secure with the plastic
thumbscrew.
10. If your envelopes still are not sealing properly, you can order a Moistener Replacement Kit (part
number 621-8) from the Supply Line by calling 1-800-243-7824.
8 • Mail Machine Maintenance
To Next Page
Loading...
