4. Open and close the jam release lever.
Upload any pending transactions:
1. Tap Settings (gear icon).
2. Tap Upload Transactions.
3. Any pending transactions will now be uploaded.
4. Tap Reset to Default.
Change the print mode:
1. Tap Print Mode.
2. Tap Date Correction.
3. Tap Apply.
4. Tap Reset to default.
Reboot the meter:
1. Turn the power off by holding the power button for 5 seconds. The power button will darken.
2. Wait for the display to turn off.
3. Wait one minute.
4. Turn the power back on.
5. Tap Envelope Printing.
6. Verify that the machine says ready to print.
Errors
Pitney Bowes Operator Guide June 2018 171
To Next Page
Loading...
