17. Re-enter the DNS Address.
18. Tap connect.
For wireless connection
1. Tap the Settings (gear) icon in the global toolbar.
2. Tap Wireless.
a. If DHCP follow these steps:
i. Only do these steps if you know the password to the WI-Fi network.
ii. Turn off the WI-FI by slliding the toggle to the left.
iii. Unplug the meter from the power.
iv. Wait 10 (ten) seconds.
v. Plug the power cable back in.
vi. Tap the power button.
vii. Tap the Settings (gear) icon
viii. Tap Wireless
ix. Turn on the Wi-Fi by sliding the toggle to the right.
x. Tap the name of the correct Wi-Fi.
xi. Re-enter the password.
3. Tap connect.
Troubleshooting
Pitney Bowes Operator Guide June 2018 210
To Next Page
Loading...
