User’s Manual of FGSD-1022 Series
1. After entering the username and password, the main screen appears as Figure 4-1-2.
Figure 4-1-2: Web main page
2. The Switch Menu on the left of the Web page let you access all the commands and statistics the Switch provides.
Now, you can use the Web management interface to continue the switch management or manage the Managed Switch by
Web interface. The Switch Menu on the left of the web page let you access all the commands and statistics the Managed
Switch provides.
1. It is recommended to use Internet Explore 6.0 or above to access Managed Switch.
2. The changed IP address take effect immediately after click on the Apply button, you need
to use the new IP address to access the Web interface.
3. For security reason, please change and memorize the new password after this first setup.
4. Only accept command in lowercase letter under web interface.
5. The WEB configuration of FGSD-1022P and FGSD-1022HP is the same with FGSD-1022
except PoE feature, so the FGSD-1022 will be the example to describe how to configure
switch and also, will describe PoE configuration in additional.
36
To Next Page
Loading...
Need help?
General
