CLUTCHING
4.1
Service Tools
WARNING
Because of the critical nature and precision balance incorporated into the drive clutch, it is absolutely essential that
no attempt at clutch disassembly and/or repair be made without factory authorized tools and service procedures.
Essential Drive Clutch Tools
Refer to the Service Tool Catalog (PN 9914681) for photos and descriptions of all tools. A tool catalog update
is available through the Polaris parts department. The part number is 9915235.
Description
Part Number
Offset Alignment Tool - 5/8” (1.6 cm) P-85 Clutches 2870426...........
Drive Clutch Puller 14mm (Small Shaft ID) 2872085...................
Strap Wrench 2870336............................................
Replacement Strap for 2870336 2870389............................
Spider Spanner Nut Driver (Jam Nut) 2870338.......................
Spider Removal / Installation Tool 2870341...........................
Holding Fixture 2871358...........................................
Holding Fixture Tab 5130518.......................................
Tapered Reamer 2870576.........................................
Spider Button Tool 2870985........................................
Clutch Bushing Rebuild Tool Kit 2871025............................
P-85 Drive Clutch Compression Tool 2870984........................
Torque Wrench, 250 ft. lb. Commercially Available.................................
Torque Wrench, 0-200 in. lb. Commercially Available...............................
Clutch Compression Tool 8700220..................................
Clutch Holding Wrench 9314177....................................
SLP Button Tool 8716010..........................................
SLP Clutch Sheave Clamp Tool 8716020............................
High Performance Roller Compression Tool PS45909..................
Pro X Drive Clutch Puller Chart
Model Clutch Puller Part Number
440 Pro X Fan 2872084
440 Pro X 2872085
600/700/800 Pro X 2872085
Enfocus Software - Customer Support
To Next Page
Loading...
Need help?
General
