REAR SUSPENSION/TRACK/TRACTION
7.33
Hi-Fax Inspection / Replacement
Hi-Fax Replacement - All Models
Hi-Fax replacement on all Polaris models is similar.
When any area of the Hi-Fax is worn to 1/8s (.3 cm.), it
should be replaced. This will save wear on other vital
components.
The slide rail is designed to operate in conditions with ad-
equate snow cover to provide sufficient lubrication. Ex-
cessive wear may be due to improper alignment, improp-
er track adjustment or machine operation on surfaces
without snow.
Replace Hi-Fax when worn to 7/16s (1.11 cm.) on PRO
X suspensions.
Hi Fax Wear Limit
7/16s (1.1 cm.)
440 Pro X PN 5521577--309
440 Pro X Fan / 600 Pro X
PN 5521603--309
WIde Hi--Fax for Ice Racing
5521587--309
7/16s (1.1 cm)
Suggested Hi Fax Wear Limit:
Pro X -- 7/16s (1.1cm.)
Enfocus Software - Customer Support
To Next Page
Loading...
Need help?
General
